Rainbird 2" PGA Valve

PGA Series Plastic Residential Irrigation Valves Rain Bird manufactures only the highest quality valves. Use PGA series plastic globe/angle valves for residential and light commercial irrigation applications. The PGA Series offers versatility at an affordable price. All Rain Bird valves work with any standard sprinkler timer. FeaturesModelsSpecificationsManuals & Literature ■Globe and angle configuration for flexibility in design and installation. ■Rugged PVC construction for reliable operation. ■Normally closed, forward flow design. ■Double-filtered pilot flow to resist debris and clogging of solenoid ports. ■Slow closing to prevent water hammer and subsequent system damage. ■Manual internal bleed operates the valve without allowing water into the valve box. Allows pressure regulator to be adjusted without turning the valve on at the controller. ■One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service. ■Non-rising flow control handle adjusts water flow as needed. ■Accommodates optional, field-installed PRS-D pressure regulating module to ensure optimum sprinkler performance. ■Accepts latching solenoid for use with Rain Bird battery-operated controllers. ■Optional purple flow control handle for non-potable water applications PGA-NP-HAN1 (1" and 1 1/2"); PGA-NP-HAN2 (2"). 100-PGA 1" (26/34) Valve 150-PGA 1 1/2" (40/49) Valve 200-PGA 2" (50/60) Valve *All models available with BSP threads. Rain Bird recommends flow rates in the supply line not to exceed 7.5 feet/second (2,3 m/s) in order to reduce the effects of water hammer. For flows below 5 GPM (1 m3/h; 32 l/s), Rain Bird recommends use of upstream filtration to prevent debris from collecting below the diaphragm. For flows below 10 GPM (2 m3/h; 63 l/s) Rain Bird recommends the flow control stem be turned down two full turns from the fully open position. Pressure: 15 to 150 psi (1,0 to 10,4 bar)Flow without PRS-D option: 2 to 150 GPM (0,5 to 34 m3/h; 0,13 to 9,44 l/s)Flow with PRS-D option: 5 to 150 GPM (1 to 34 m3/h; 0,32 to 9,44 l/s)Temperature: Up to 110° F (43° C)24 VAC 50/60 Hz (cycles per second) solenoid power requirement: 0.41 A (9.8 VA) inrush curren0.28 A (6.7 VA) holding currentSolenoid coil resistance: 24 Ohms, nominalDimensions00-PGA: 7 1/4" x 5 1/2" x 3 1/4" (18,4 cm) x (14,0 cm) x (8,3 cm) 150-PGA: 8" x 6 3/4" x 3 1/2" (20,3 cm) x (17,2 cm) x (8,9 cm) 200-PGA: 10" x 7 3/4" x 5" (25,4 cm) x (23,5 cm) x (12,7 cm) Note: The PRS-D option adds 2" (5,1 cm) to the valve height Instruction Manual (PDF: 274 KB) Valve Installation/Maintenance Tips (PDF: 229 KB) Performance Charts (PDF: 61 KB) Tech Specs (PDF: 979 KB) Replacement Parts List (PDF: 217 KB) PGA Valve Troubleshooting Guide (PDF: 610 KB) | MoreClick to Enlarge Photos